The details of the smart meter

If the meter is switched on and the electricity meter display is active, the display runs through 4 values continuously (day/night consumption and day/night injection). This is the automatic display.
The display shows a different value each time the push button is pressed (green button). This is the manual display.

Information is displayed on the screen using several codes. Here they are with their meaning.

CODE	MEANING	EXAMPLE
My consumption
1.8.0	Total energy extracted in kWh (sum of 1.8.1 and 1.8.2).
1.8.1	Total energy extraction in kWh at the day rate.
1.8.2	Total energy extraction in kWh at the night rate.
1.7.0	Power being extracted in kW at this precise moment.
1.6.0	Current month's peak extraction in kW.
My injection
2.8.0	Total energy injected in kWh (sum of 2.8.1 and 2.8.2).
2.8.1	Total energy injection in kWh at the day rate.
2.8.2	Total energy injection in kWh at the night rate.
2.7.0	Power being injected in kW at this precise moment.
Voltage and current
32.7.0	Voltage at this precise moment in phase 1 in V. • For a three-wire connection, this is the line voltage. • For a four-wire connection, this is the phase voltage.
52.7.0*	Voltage at this precise moment in phase 2 in V. • For a three-wire connection, this is the line voltage. • For a four-wire connection, this is the phase voltage. For information: for a three-wire connection, this voltage will indicate 0 V*.
72.7.0*	Voltage at this precise moment in phase 3 in V. • For a three-wire connection, this is the line voltage. • For a four-wire connection, this is the phase voltage.
31.7.0	Current at this precise moment in phase 1 in A.
51.7.0*	Current at this precise moment in phase 2 in A.
71.7.0*	Current at this precise moment in phase 3 in A.
Limitations
17.0.0	Power limit set in W. By default, there is no limit (MAX).
31.4.0	Current limit set in A. By default, there is no limit (MAX).
Other information
0.2.0	Metrological software version. On XS212, XT211, E360-1P and E360-3P this code is divided into two parts (codes 0.2.0-0 and 0.2.0-1).
0.2.8	Digital signature of the metrological software version. On XS212, XT211, E360-1P and E360-3P this code is divided into two parts (codes 0.2.8-0 and 0.2.8-1).
1.2.0	Functional (non-metrological) software version. Only on S211 and T211.
1.2.8	Signature of the functional (non-metrological) software. Only on S211 and T211.
96.1.2	Not used by Sibelga. Only on XS212, XT211, E360-1P and E360-3P.
96.1.4	Protocol version of port P1. Only on XS212, XT211, E360-1P and E360-3P.